Unavailable to Purchase
The Codelocks CL600 Brushed Steel Back To Back Plates Only are front and back, back to back plates. For use with existing Mortice latch or lock.
The existing lock that is being used with this product must either have a 22mm fixing hole before the spindle, or two horizontal holes on either side of the spindle (38mm centres).
The CL600 range incorporates the brand new Quick Code system, which allows the code on the doors to be altered swiftly. Usually, the majority of mechanical digital locks need the lock to be detached from the door in order to change the code.
In Code Free mode the external lever will retract the latchbolt without needing the code. This function is perfect for day to day use when keying in a code is not needed e.g. external doors in a school with high traffic.
The CL600 coded plates are programmed with a random code beginning with the "C" clear button. To alter the code after installation, the lock initially must removed from the fitted door. The code is non sequential, which means the code can be inputted in any order e.g. 1234 can be 4321 or 1342 or whatever is the easiest sequence. With the 13 buttons a grand total of 8,191 various codes are available, all of which can be inputted in any order.
IMPORTANT: When using Codelocks CL600 Brushed Steel Back To Back Plates Only, make sure you test with your chosen lock-case to make sure that the latch fully retracts from from the code side without much resistance. Some lock-cases contain a heavily sprung latch follower which is constructed to use with un-sprung lever furniture. This heavy springing may defeat the clutch on the lock.
Please take note - mechanical lock's code chambers requires the lever to be rotated at least 45 degrees to reset the lock for the upcoming code user.
Unavailable to Purchase
Ms Garza
16 November 2019, 15:53 pmA Wells
10 April 2018, 18:51 pmEdward Spencer
21 April 2017, 18:01 pmMr Gray
2 July 2016, 17:10 pmalice
5 March 2015, 19:15 pmMr Fields
17 December 2014, 12:18 pmMiss Garcia
27 November 2014, 15:39 pm4.4 out of 5.0
MechLite is now an AC Leigh Company. Same excellent service, Trade Catalogue and Click and Collect at AC Leigh Branches in Ipswich, Colchester and Norwich. All Orders will continue to be delivered as normal.